Fiat 500 Key Fob Replacement
If your 500 keyfob stops working, try a different one to determine if it will be recognized by the car. If it does, the issue is likely with the battery or water damage on the original fob.
First, replace the battery. The "+" side should be facing down.
Dead Battery
The majority of the time, when a fob's not working, it's because the battery is dead. This isn't a problem to solve and most fobs notify you that the battery is getting depleted. You can find the correct procedure for most car key fobs on YouTube or in the owner's manual. You can also change it by taking it to an authorized locksmith or a dealer who sold it to you.
Sometimes, a fob won't working due to a fault on the circuit board inside. It's not a common occurrence but it can occur. If you drop the fob on something sharp, it could cause damage to the internal chip. It could also happen if you use an aftermarket fob and it doesn't work. In this situation, it is necessary to visit a dealer or locksmith to have the key reprogRammed to work with your 500.
One 2012 FIAT FIAT 500 flip key remote – Looks like Ilco with locks, unlocks and trunk buttons - new keyless entry replacement (will require cutting and program by locksmith).
Chips Damaged
Fiat 500 key fobs are wireless devices that send signals to the car every time you press the button. It has a microchip containing details about the code required to connect with your car. If the chip is damaged, it will not transmit the correct code, and the car will not start. Locksmiths can repair this type of damage. United Locksmith can complete this repair on both traditional and newer models, so don't hesitate to call us.
You can purchase a new fob and have it professionally programmed by locksmiths. It's less expensive to do this than go to the dealer and it works just as well. You will need to provide certain information to the locksmith, for example, the year your car was built and the model.
Rub the chip with an old dollar bill if not certain of what to do. The copper in the bill is abrasive, and will remove oxidation and dirt. However, it won't cause harm to the microchip. The chip may not be repairable if it is physically damaged. This can happen when you drop it, knock it over with your car or experience any other kind of physical force.
Water Damage
Whether you accidentally dropped your keys in the pool, threw them in your pocket while you were swimming at the beach, or splashed them with water on a rainy day, it's likely that your fob will suffer from water damage. Even if it's just a tiny amount of water on the key, this can cause serious problems to its electronics and stop it from working effectively.
You can usually fix this issue by removing the fob and cleaning it using a paper towel. Once the fob has dried and clean, you can replace its battery and it should begin working normally.
You could also take your fob to a local locksmith shop or auto shop to have it professionally cleaned and programmed. These experts can make use of special equipment to ensure that the key fob is compatible with the computer in your car.
If your Fiat 500's main fob stops working, it can be a stressful and frustrating. You may be tempted go to the dealer to get your key fob replaced but this could be expensive and unaffordable. A locksmith can replace your key fob, without having to visit an auto dealer. Because of this, they are a better choice than an auto dealer.
Pairing Issues
If you accidentally drop your keyfob or it ceases to function, and nothing else seems to be wrong, it could be the chip. This could be due to water damage or the battery is dead.
This can often be done by following the steps in your owner's guide. If you're having problems or your manual doesn't work then you should hire an automotive locksmith take care of this task. This ensures the chip isn't fried and will likely be the most affordable solution.
A number of owners have reported that their keys won't lock their cars. This could be a major issue if you're driving to a gas station and want to fill up. Some owners have reported the locking mechanism of their 500's malfunctioning and having to replace the entire intermediate shaft for steering. This problem has actually been mentioned in a technical service bulletin (TSB) issued by Fiat.
If spare key fiat 500 having issues with your Fiat, an experienced locksmith can assist. They can duplicate your existing key or design an entirely new one that can unlock and start your car. They can do this without seeing your key, and are typically more affordable than purchasing it from a dealership.